Your guide to LG’s easy to install AWHP

As an ‘all-in-one’ heating solution, the Therma V R32 Monobloc outdoor unit consists of three main components: a plate heat exchanger, an A-Class water pump and the expansion tank.

Quick and easy installation

With no additional refrigerant piping work, installers can easily check the unit and provide service just by simply removing 3 screws. Clip-type water strainers are also installed for easy access without the need for extra tools.

Pre-installation settings can be prepared with LG’s Therma V Configurator. The data can be saved into a memory card from the installers’ office which can then be inserted into the back of the remote controller to activate configuration data.

How it works

Heat is generated by the outdoor unit via heat exchange with external air. This is transferred to the domestic hot water tank to provide heating and hot water.

This solution can operate in external temperatures as low as -25°C and is able to offer leaving water temperature of 65°C at maximum.

The system

Equipped with a revolutionary scroll compressor, the tilting motion of scroll is especially improved which increases overall efficiency and reliability.  The compressor operation ranges are improved to perform from 10 Hz to 135 Hz.

The environmentally friendly R32 refrigerant has a global warming potential of 675, 70% lower than that of R410A’s – making the Therma v R32 Monobloc highly energy efficient as a greener heating solution.

Find out more about LG’s air to water heat pump unit here.